MODIFICATION SERVICES  & PARTS
FOR THE MOSIN NAGANT RIFLES

EMAIL: MOSINBOLT@GMAIL.COM


LOW PROFILE MOD SHOWN WITH ATI BOLT-TO-RECEIVER SCOPE RAIL,
2.5'' LONG HANDLE, KICKED OUT BALL END, IN SATIN(ORIGINAL) FINISH
WITH PULL RING MODIFICATION

WARRANTIED FOR LIFE***

TURN AROUND TIME IS  TYPICALLY 2-5 BUSINESS DAYS FROM OUR RECEIPT OF
YOUR PARTS & INFORMATION TO TIME OF
COMPLETION AND SHIPMENT DATE

CLICK
HERE FOR A COPY OF OUR PRINTABLE
DATA FORM TO SEND WITH YOUR PARTS.

LOW PROFILE STYLE HANDLE SWEPT BACK 10 DEGREES TO FIT
ATI COMPOSIT STOCK.   2.5'' HANDLE LENGTH, KICKED OUT BALL END,
TACTICAL KNOB(ADD $15.00), FLAT FINISH


LOW PROFILE, 2.7'' HANDLE LENGTH, 10 DEGREE SWEEP ANGLE.  
BOYD'S LAMINATED STOCK IN-LETTED FOR LOW PROFILE HANDLE


 
LOW PROFILE, 2.7'' HANDLE LENGTH, 15 DEGREE SWEEP ANGLE.  
ARCH ANGEL STOCK.  MINOR IN-LETTING, SHOWN ABOVE COVER PLATE,
IS REQUIRED TO CLEAR THE LOW PROFILE HANDLE SHANK IN THE CLOSED
POSITION.  A SWEEP ANGLE OF 15-30 DEGREES IS REQUIRED TO CLEAR THE
COVER PLATE SCREWS.  THE PULL RING MODIFICATION WILL INTERFERE
WITH THE CHEEK REST UNLESS IT IS NOTCHED TO ACCOMMODATE.


 

3/8'' SNIPER STYLE  BOLT MOD WITH STANDARD 2.7''
HANDLE LENGTH, 30 DEGREE SWEEP POLISHED


LOW PROFILE, 2.7'' HANDLE LENGTH, 10 DEGREE SWEEP ANGLE.  
ORIGINAL WOOD STOCK IN-LETTED FOR LOW PROFILE HANDLE
SUBMITTED BY ROSCOE WORLD.  PLEASE CHECK OUT ROSCOE
WORLD
FOR MILITARY RIFLE PARTS AND SERVICES.


SNIPER STYLE STRAIGHT DOWN AND POLISHED
WITH 3/8'' HANDLE X 3'' LONG, NO KICK OUT SHOWN
WITH JMECK(WWW.JMECKSCOPEMOUNTS.COM) LOW PROFILE
SCOPE MOUNT & STANDARD EYE RELIEF RIFLE SCOPE



http://img.villagephotos.com/p/2007-7/1268456/flat_ati_3.jpg

SNIPER STYLE STRAIGHT DOWN AND POLISHED
WITH 3/8'' HANDLE X 3'' LONG, NO KICK OUT SHOWN
WITH ATI REAR SIGHT REPLACEMENT MOUNT
ORIGINAL WOOD STOCK(REFINISHED)


COMPLETED PULL RING BOLT PIECE COCKING KNOBS
SHOWN IN POLISHED FINISH

LEFT: SNIPER REPRO STYLE BOLT MODIFICATION.  3/8 X 2.7''
HANDLE LENGTH, STRAIGHT DOWN, SATIN FINISH
RIGHT: LOW PROFILE
, POLISHED, SATIN(ORIGINAL), AND FLAT

STANDARD LOW PROFILE MOD TO FIT ATI STOCK AND BOLT-
TO-RECEIVER SCOPE MOUNT IN SATIN(ORIGINAL)  FINISH

2.7'' HANDLE LENGTH

LOW PROFILE STYLE
APPLICATIONS AND OPTIONS


WILL MATCH THE HANDLE IN-LETTING FOR ATI STOCK WITH
STANDARD (10 DEGREE) SWEEP AS SHOWN IN PICS.  YOU MAY
ALSO USE A SWEEP ANGLE OF YOUR CHOICE  INCLUDING
STRAIGHT DOWN

WILL WORK WITH THE ATI BOLT-TO-RECEIVER STOCK MOUNT,
ROCK SOLID SCOPE MOUNT, AND VIRTUALLY ANY
OTHER AVAILABLE MOUNT

WILL REQUIRE IN-LETTING OF ORIGINAL WOOD STOCKS,
BOYD'S, AND RICHARD'S MICRO FIT STOCKS TO CLEAR HANDLE

IS AVAILABLE IN POLISHED, FLAT, OR SATIN(CLOSE TO ORIGINAL)
FINISHES.  WE WILL MATCH YOUR REMAINING BOLT PARTS TO
THE FINISH OF YOUR CHOICE

STANDARD LENGTH HANDLE IS 2.5'' AND IS MEASURED FROM THE
TOP OF THE HANDLE BEND TO THE BOTTOM OF THE BALL.  
YOU MAY REQUEST A HANDLE LENGTH OF YOUR CHOICE
UP TO 3.25''.  

YOU MAY REQUEST A KICKED OUT BALL BEND
FOR ADDITIONAL CLEARANCE BETWEEN BALL AND
STOCK(MAY BE HELPFUL WHEN USING GLOVES)

SNIPER STYLE APPLICATIONS AND OPTIONS

WILL WORK WITH ORIGINAL SNIPER SCOPE MOUNTS, ATI &
MOST OTHER REAR SIGHT REPLACEMENT SCOPE MOUNTS
AND THE JMECK MOUNT SYSTEMS

WILL NOT WORK WITH THE ATI BOLT-TO-RECEIVER STOCK MOUNT,
OR ROCK SOLID SCOPE MOUNT

IS AVAILABLE WITH THE HANDLE STRAIGHT DOWN OR
SWEPT TO THE ANGLE OF YOUR CHOICE(30 DEG. STANDARD)

IS AVAILABLE IN POLISHED, FLAT, OR SATIN(CLOSE TO ORIGINAL)
FINISHES.  WE WILL MATCH YOUR REMAINING BOLT PARTS TO
THE FINISH OF YOUR CHOICE

STANDARD LENGTH HANDLE IS 2.7''.  YOU MAY REQUEST A HANDLE
LENGTH OF YOUR CHOICE.  THE SNIPER STYLE HANDLE IS  
AVAILABLE IN 5/16'' AND 3/8'' DIAMETER STAINLESS

MANY REQUEST A 2.7'' LENGTH X 3/8'' DIA. WHEN GOING AFTER
AN ORIGINAL LOOK

YOU MAY REQUEST A KICKED OUT BALL BEND


YOUR STAMPED NUMBERS MAY BE
RETAINED OR REMOVED.  SCRIBED/ETCHED
NUMBERS WILL BE REMOVED

YOU MUST SPECIFY YOUR STYLE(LOW PROFILE OR SNIPER)
AND OPTIONS WHEN PLACING YOUR ORDER TO AVOID DELAYS!  PLEASE
INCLUDE A COPY OF OUR DATA SHEET WITH YOUR BOLT PARTS.  
FAILURE TO DO SO WILL CAUSE DELAYS!!!!  
CLICK HERE FOR A COPY OF
OUR PRINTABLE DATA SHEET TO SEND WITH YOUR PARTS.


                       CURRENT PRICING FOR SERVICES
             (YOU SEND US YOUR PARTS FOR MODIFICATION)


BOLT HANDLE MODIFICATION SERVICE                            $50.00 ea.  
& ASSEMBLY  REFINISH                              

BOLT HANDLE W/PULL RING                                                $65.00 ea.  
MODIFICATION & ASSEMBLY REFINISH       

BOLT ASSEMBLY REFINISH SERVICE                                 $20.00 ea.  
(FLAT, SATIN, POLISHED)

COCKING PIECE PULL RING   MODIFICATION                    $20.00 ea.  
AND REFINISH SERVICE(COCKING KNOB ONLY)

BOLT BODY NUMBER RE-STAMP.  ENGLISH                       $12.00
CHARACTERS AND NUMERALS ONLY.  7 CHARACTERS
MAXIMUM.


              COMPLETED PARTS(WE SUPPLY ORIGINAL PARTS FOR MODIFICATION)

              
COMPLETED PULL RING COCKING KNOB                           $26.00ea.
YOUR CHOICE OF FINISH      

FINISHED SNIPER STYLE OR LOW PROFILE BOLT            $85.00ea.
BODY TO YOUR SPEC(COMPLETE DATA SHEET TO
INCLUDE WITH YOUR PAYMENT)

NEW OLD STOCK EXTRACTOR                                              $20.00ea.

BOLT HEAD WITH EXTRACTOR                                             $25.00ea.


RETURN SHIPPING/SHIPPING USPS PRIORITY MAIL        $ 6.50

DELIVERY CONFIRMATION AND TRACKING NUMBER
FOR ALL ORDERS,  ANY QUANTITY,  U.S. ONLY


PLEASE REMIT PAYMENT VIA MONEY ORDER OR PERSONAL CHECK.  
WE DO NOT ACCEPT PAYPAL FOR WEB SITE ORDERS AND ARE NOT
CURRENTLY SET UP TO PROCESS CREDIT CARD TRANSACTIONS.

PLEASE CONTACT MOSINBOLT@GMAIL.COM FOR
SHIPPING AND PAYMENT INFO..

BY PURCHASING THIS SERVICE YOU ASSUME ALL RESPONSIBILITY FOR THE
INSTALLATION AND USE WITH YOUR FIREARM.  I WOULD ADVISE YOU TO HAVE
YOUR GUN CHECKED BY A COMPETENT GUNSMITH WHEN MAKING ANY
ALTERATIONS.

WE SHIP TO THE U.S. ONLY!!!!

   THANKS FOR LOOKING!


Assembled using the FreeForm Builder at robshelp.com